Caparol CapaTrend

Description

Material Properties

• Solvent-free, unplasticized.
• Free of fogging-active substances.
• Water-dilutable, ecologically compatible, low odour.
• sd-value < 0.1 m
• High opacity (hiding/covering power).
• Easy to apply.

Material Base / Vehicle

Synthetic resin dispersion/emulsion according to German standard DIN 55945.

Packaging/Package Size

• Standard Product: 2.5 l, 5 l, 10 l, 12.5 l and 15 l   Airfix: 25 l hobbock
• Bright White: 12.5 l, 15 l   Airfix: 25 l hobbock
• Off-White: 12.5 l, 15 l   Airfix: 25 l hobbock
• Black: 12.5 l
• ColorExpress: 2.5 l, 5 l, 7.5 l and 12.5 l

Colours

White, Bright White, Off-White (approx. RAL 9010) and Black.

CapaTrend can be tinted with CaparolColor or AmphiColor^® (AVA) colourants. If more than one container is manually tinted, all product must be thoroughly mixed before use in order to avoid colour differences. Quantities of 100 litres or more in individual colour shades may be ordered ready-tinted ex factory.

CapaTrend is tintable to all current colour collections via the ColorExpress tinting & mixing machine system. Check tinted product before applying to avoid colour deviation. Always use tinted paint of same batch, when applying on seamless surfaces.
When colour shades with a lower opacity (hiding/covering power) are used, e.g. red, orange or yellow, it is advisable to apply one first (priming) coat of CapaTrend or Caparol-Haftgrund, tinted in a matching priming system colour, available via ColorExpress. Possibly a second finishing coat may be necessary.

Gloss Level

Dull matt (Dead-matt according to DIN EN 13 300).

Storage

Keep in a cool, but frost-free place.

Technical Data

Characteristics according to DIN EN 13 300: Tinting may cause variations.

Wet abrasion

Wet scrub resistance Class 3, corresponds to “wash resistant” as per German standard DIN 53778

Contrast ratio

Opacity (hiding/covering power) Class 2, with a spreading rate of 7 m²/l or 140 ml/m²

Maximum particle (grit) size

Fine (< 100 µm)

Density

Approx. 1.5 g/cm³

Suitability according to Technical Information No. 606 Definition of Application Areas